Fox News Flash top headlines are here. Check out what's clicking on Foxnews.com. An attempt to use an extendable robot to remove a fragment of melted fuel from a wrecked reactor at Japan's tsunami-hit Fukushima Daiichi nuclear power plant was suspended Thursday due to a technical issue. The collection of a tiny sample of the debris inside the Unit 2 reactor's primary containment vessel would start the fuel debris removal phase, the most challenging part of the decades-long decommissioning of the plant where three reactors were destroyed in the March 11, 2011, magnitude 9.0 earthquake and tsunami disaster. The work was stopped when workers noticed that five 1.5-meter (5-foot) pipes used to maneuver the robot were placed in the wrong order and could not be corrected within the time limit for their radiation exposure, the plant operator Tokyo Electric Power Company Holdings said.

U.S. Ambassador to Japan Rahm Emanuel visited a Fukushima coastal city to support the local fishing industry after China and South Korea raised the alarm over water discharge began from the Fukushima Daiichi nuclear plant. As Japan prepares to mark the 13th anniversary of its worst-ever nuclear disaster, the man in charge of cleaning it up says his team is fighting to bring a sample out of the heart of the site's radioactive debris. A decades-long project to clean up the remains of the Fukushima Daiichi nuclear power plant is preparing to remove damaged fuel debris from the plant's reactors, but much about what's inside them is still a mystery. The key to unlocking that mystery -- and figuring out how to clean it up -- is a sample of melted fuel from inside a reactor, said Akira Ono, head of decommissioning for Tokyo Electric Power Company Holdings, in an interview with The Associated Press. Getting that sample would be like penetrating "the main keep of the castle" in the battle of decommissioning, Ono said.

The operator of the tsunami-wrecked Fukushima nuclear plant began removing fuel Monday from a cooling pool at one of three reactors that melted down in the 2011 disaster, a milestone in what will be a decades-long process to decommission the facility. Tokyo Electric Power Co. said workers started removing the first of 566 used and unused fuel units stored in the pool at Unit 3. The fuel units in the pool located high up in reactor buildings are intact despite the disaster, but the pools are not enclosed, so removing the units to safer ground is crucial to avoid disaster in case of another major earthquake similar to the one that caused the 2011 tsunami. TEPCO says the removal at Unit 3 will take two years, followed by the two other reactors, where about 1,000 fuel units remain in the storage pools. Removing fuel units from the cooling pools comes ahead of the real challenge of removing melted fuel from inside the reactors, but details of how that might be done are still largely unknown. Removing the fuel in the cooling pools was delayed more than four years by mishaps, high radiation and radioactive debris from an explosion that occurred at the time of the reactor meltdowns, underscoring the difficulties that remain.

The operator of the tsunami-wrecked Fukushima nuclear plant has begun removing fuel from a cooling pool at one of three reactors that melted down in the 2011 disaster, a milestone in the decades-long process to decommission the plant. Tokyo Electric Power Co (Tepco) said on Monday that workers started removing the first of 566 used and unused fuel units stored in the pool at Unit 3. The fuel units in the pool located high up in reactor buildings are intact despite the disaster, but the pools are not enclosed so removing the units to safer ground is crucial to avoid disaster in case of another major quake. Tepco said the removal at Unit 3 would take two years, followed by the two other reactors. The step comes ahead of the real challenge of removing melted fuel from inside the reactors, but details of how that might be done are still largely unknown. Removing the fuel in the cooling pools was delayed five years by mishaps, high radiation and radioactive debris from an explosion that occurred at the time of the reactor meltdown, underscoring the difficulties that remain.

The owner of the wrecked Fukushima No. 1 power plant is trying this week to touch melted fuel at the bottom of the plant for the first time since the disaster almost eight years ago, a tiny but key step toward retrieving the radioactive material amid a ¥21.5 trillion ($195 billion) cleanup effort. Tokyo Electric Power Co. Holdings Inc. will on Wednesday insert a robot developed by Toshiba Corp. to make contact with material believed to contain melted fuel inside the containment vessel of the unit 2 reactor, one of three units that melted down after the March 2011 earthquake and tsunami. "We plan to confirm if we can move or lift the debris or if it crumbles," Joji Hara, a spokesman for Tepco said by phone Friday. Tepco doesn't plan to collect samples during the survey. The country is seeking to clean up the Fukushima disaster, the world's worst atomic accident since Chernobyl, which prompted a mass shutdown of its reactors.

YOKOHAMA - Toshiba Corp. unveiled a remote-controlled robot with tongs on Monday that it hopes will be able to probe the inside of one of the three damaged reactors at Japan's tsunami-hit Fukushima nuclear plant and grip chunks of highly radioactive melted fuel. The device is designed to slide down an extendable 11-meter (36-foot) long pipe and touch melted fuel inside reactor 2's primary containment vessel. The reactor was built by Toshiba and GE. An earlier probe carrying a camera captured images of pieces of melted fuel in the reactor last year, and robotic probes in the two other reactors have detected traces of damaged fuel, but the exact location, contents and other details remain largely unknown. Toshiba's energy systems unit said experiments with the new probe planned in February are key to determining the proper equipment and technologies needed to remove the fuel debris, the most challenging part of the decommissioning process expected to take decades.

Toshiba unveiled a remote-controlled robot with tongs on Monday that it hopes will be able to probe the inside of one of the three damaged reactors at Japan's tsunami-hit Fukushima nuclear plant and grip chunks of highly radioactive melted fuel. The device is designed to slide down an extendable 11-meter (36-foot) long pipe and touch melted fuel inside the Unit 2 reactor's primary containment vessel. The reactor was built by Toshiba and GE. An earlier probe carrying a camera captured images of pieces of melted fuel in the reactor last year, and robotic probes in the two other reactors have detected traces of damaged fuel, but the exact location, contents and other details remain largely unknown. Toshiba unveiled the device carrying tongs that comes out of a long telescopic pipe for an internal probe in one of three damaged reactor chambers at Japan's tsunami-hit Fukushima nuclear plant - this time to touch chunks of melted fuel Toshiba's energy systems unit said experiments with the new probe planned in February are key to determining the proper equipment and technologies needed to remove the fuel debris, the most challenging part of the decommissioning process expected to take decades.

Work to scrap the crippled Fukushima No. 1 nuclear plant and deal with radioactive water buildup at the site is expected to cost around ¥220 billion ($2 billion) annually over the three-year period from fiscal 2018, a source said Thursday. It is the first time that Tokyo Electric Power Company Holdings Inc. and the state-backed Nuclear Damage Compensation and Decommissioning Facilitation Corp., or NDF, have provided an estimate of annual costs for cleaning up the Fukushima No. 1 complex, more than seven years after the tsunami-triggered nuclear crisis. Tepco and the NDF will soon submit the financial plan to the government to gain approval from industry minister Hiroshige Seko. The NDF, established after the Fukushima crisis started, holds a majority stake in Tepco, and instructs the utility on how to effectively decommission the plant. The outlay plan comes as total costs to scrap the nuclear plant have ballooned.

More melted fuel has been found at the bottom of the Fukushima power planet, seven years after Japan's worst nuclear disaster. Tokyo Electric Power Company (TEPCO), the operator of Japan's crippled nuclear plant, says a long telescopic probe has successfully captured images of the fuel inside the plant's Unit 2 primary containment vessel. The images showed that at least part of the fuel breached the core, falling to the vessel's floor. TEPCO says that that the status inside the primary containment vessel is still stable, and that there are no changes in radiation levels at the site boundaries of Fukushima Daiichi's Nuclear Power Plant. A massive earthquake and tsunami in 2011 caused three reactors at the Fukushima plant to melt.

Images captured by an underwater robot on Saturday showed massive deposits believed to be melted nuclear fuel covering the floor of a damaged reactor at Japan's destroyed Fukushima nuclear plant. The robot found large amounts of solidified lava-like rocks and lumps in layers as thick as 1m on the bottom inside a main structure called the pedestal that sits underneath the core inside the primary containment vessel of Fukushima's Unit 3 reactor, said the plant's operator, Tokyo Electric Power Co. On Friday, the robot spotted suspected debris of melted fuel for the first time since the 2011 earthquake and tsunami caused multiple meltdowns and destroyed the plant. The three-day investigation of Unit 3 ended on Saturday. Locating and analysing the fuel debris and damage in each of the plant's three wrecked reactors is crucial for decommissioning the plant. The search for melted fuel in the two other reactors has so far been unsuccessful because of damage and extremely high radiation levels.